Xinjiang closed water mist nozzle

Xinjiang closed water mist nozzles are available in high pressure and medium and low pressure, and can be used in different scenarios to achieve good fire extinguishing effects. There are many types of closed water mist nozzles in Xinjiang. The prices of different types of closed water mist nozzles are also different. It depends on the price quoted by the manufacturer. The following is an introduction to Xinjiang closed water mist nozzles,type、model、parameter、price、factory、addressand other related content.

What is a closed water mist nozzle?

The closed water mist nozzle is a normally closed nozzle. The temperature sensing and locking device of the nozzle will only fall off and open the nozzle under a predetermined temperature environment. Therefore, when a fire occurs, this sprinkler system will only turn on the nozzles that are in the flame or near the fire source to extinguish the fire.

The closed valve is usually closed, but there is water in front and behind the valve. When a fire breaks out, the high temperature causes the glass bubble of the closed sprinkler head to rupture. When the water spurts out, the valve detects a decrease in water pressure at the rear, thus sending a warning signal to the alarm system, which then activates the fire pump to supply water.

1. Types of closed water mist sprinklers in Xinjiang

Closed water mist nozzles can be divided into high-pressure closed water mist nozzles, medium-pressure closed water mist nozzles and low-pressure closed water mist nozzles according to working pressure. These three types of nozzles are used in different types of closed water mist systems.

1. Low-pressure water mist fire extinguishing system: P<1.20Mpa

2. Medium pressure water mist fire extinguishing system: 1.20Mpa

3. High-pressure water mist fire extinguishing system: P>3.50Mpa

2. Xinjiang closed water mist nozzle model

There are two types of closed water mist nozzles commonly used in Xinjiang: high-pressure water mist closed nozzles and medium-pressure water mist closed nozzles. Their models are generally composed of parameters such as the flow coefficient of the nozzle, working pressure, glass ball temperature and size. The conventional models of closed water mist nozzles in Xinjiang include the following:

1. High-pressure fine water mist closed nozzle model

XSW-T1.0/10-57°Cφ2；XSW-T1.2/10-57°Cφ2；XSW-T1.5/10-57°Cφ2；XSW-T1.7/10-57°Cφ2；XSW-T2.0/10-57°Cφ2；XSW-T2.5/10-57°Cφ2；XSW-T3.0/10-57°Cφ2；XSW-T3.5/10-57°Cφ2；XSW-T4.0/5-57°Cφ2；XSW-T4.5/5-57°Cφ2；XSW-T5.0/5-57°Cφ2；XSW-T5.5/5-57°Cφ2

2. Medium pressure fine water mist closed nozzle model

XSW-T2.0/1.5-57°Cφ2；XSW-T2.5/1.5-57°Cφ2；XSW-T3.0/1.5-57°Cφ2；XSW-T3.5/1.5-57°Cφ2；XSW-T4.0/1.5-57°Cφ2；XSW-T4.5/1.5-57°Cφ2；XSW-T5.0/1.5-57°Cφ2；XSW-T5.5/1.5-57°Cφ2

3. Xinjiang closed water mist nozzle parameters

There are many parameters for closed water mist nozzles. First, there are some parameters of the nozzle, such as the material of the nozzle, specifications and sizes of the nozzle, etc.; secondly, there are spray parameters, such as mist shape, atomization angle, etc.; there are also some performance parameters, such as working pressure, flow rate, etc. If you want to customize Xinjiang closed water mist nozzles, you need to provide at least the following parameters:

(1) Nozzle (nozzle) structural type, such as appearance size, thread, structure, etc.;

(2) Medium;

(3) Flow coefficient;

(4) Performance requirements, such as droplet diameter, range, spray angle, installation parameters, etc.;

(5) Minimum and maximum working pressure;

(6) Application site and working environment;

(7) Material;

(8) The closed nozzle should also provide glass ball parameters.

4. Xinjiang closed water mist nozzle price

The market price of closed water mist nozzles in Xinjiang ranges from high to low, with the unit price basically around 200 yuan. Generally speaking, the price of closed water mist nozzles in Xinjiang is related to the materials used, the difficulty of design and processing, the wholesale quantity, glass balls, etc. Take the material as an example, stainless steel and brass are used to produce closed water mist nozzles, and the cost is different; and the wholesale quantity, the unit price of wholesale 100 closed water mist nozzles and 1,000 pieces are also different. Of course, the specific price must be based on the quotation of the Xinjiang closed water mist nozzle manufacturer.

Click to learn:Xinjiang fine water mist nozzle price

5. Xinjiang closed water mist nozzle manufacturer

Among Xinjiang closed water mist nozzle manufacturers, Xinjiang Danfoss Fire Protection, Ansu Fire Protection and other manufacturers are relatively strong. They have a wide range of fine water mist products that can meet the needs of different customers. At present, Lanzhong Electromechanical has developed various types of water mist nozzles and water mist spray guns in product fields such as fixed water mist fire extinguishing systems and mobile water mist fire extinguishing devices. It has cooperated with many domestic water mist system integration manufacturers and has a wide range of customer groups in the United Kingdom, Turkey, the Netherlands, Denmark, Sweden, India, and Russia. Customers are welcome to come for on-site inspection and cooperation.

Click to learn:Xinjiang fine water mist nozzle manufacturer

6. Xinjiang closed water mist nozzle address

Xinjiang closed water mist nozzle address: Urumqi City, Karamay City, Shihezi City, Alar City, Tumushuk City, Wujiaqu City, Beitun City, Hami City, Turpan City, Aksu City, Kashgar City, Hotan City, Yining City, Tacheng City.

Xinjiang closed water mist nozzles are now used in libraries, ancient buildings, distribution cabinets, traffic tunnels, computer rooms and other scenes, and can be used to extinguish combustible solid fires, combustible liquid fires and electrical fires. Xinjiang closed water mist nozzles are widely used and can be customized according to different scenarios. Lanzhong Electromechanical has this ability and can design different types of closed water mist nozzles to meet the needs of customers in various industries.