More
Recommended products
Anhui Lanzhong Mechanical and Electrical Equipment Co., Ltd.
WhatsApp: +86-138-6598-5643
Contact person: Alex Wang
Email: alexwang@watermist.com.cn
Address: Room 101-Room 401, Building B8, Gongtou Lingang New Industrial Park, No.21 Science Avenue, Shou County, Huainan city, Anhui Province, China
Industry trends
Why is the spray effect of the automatic fine atomization nozzle not good?
Automatic fine atomization nozzle, commonly known as automatic atomization spray gun and rosin nozzle, is a fire extinguishing nozzle that can control the atomization flow rate and angle. However, sometimes the spray effect is not good, which affects the speed and effect of fire extinguishing. todayFine atomization nozzle factoryLet’s analyze the reasons with you:
Reason 1: Whether it is eroded
The automatic fine atomization nozzle is a pressure-type device. The high-speed water flow will corrode the inside of the spray gun, thereby changing the internal structure of the spray gun, causing the pressure of the spray gun to decrease and the spray to become irregular, resulting in unsatisfactory spray effects!
Solution: Choose an appropriate spray gun based on its water pressure tolerance.
Reason 2: Whether it is corroded
The automatic fine atomization nozzle sometimes sprays not necessarily water, but other chemical liquids, which may cause corrosion over time.
Solution: Clean the automatic atomizing nozzle immediately after each spray. Also pay attention to the choice of cleaning agent. If you choose the wrong cleaning agent (choose a corrosive one), it will cause secondary corrosion of the nozzle.
Reason three: Whether blockage occurs
The water used for fire extinguishing is not domestic water and may contain impurities. After the automatic fine atomization nozzle is used for a long time, chemical substances and impurities will be deposited inside or on the edge of the spray gun, causing the spray gun to become clogged. Once the nozzle is clogged, the pressure inside it will increase, damaging the inside of the nozzle.
Solution: Clean the inside of the spray gun regularly to keep the inside of the spray gun clean.
Reason 4. Accidental damage
There are many reasons for accidental damage, which may be irregular use, improper maintenance, or improper storage, etc.
Solution: Use it correctly according to regulations, maintain it regularly, and keep it properly
Basically, there are only so many reasons. If the nozzle effect is not good, you can find and eliminate it according to the above reasons. I hope it can help everyone.
The automatic fine atomization nozzle is a pressure-type device. The high-speed water flow will corrode the inside of the spray gun, thereby changing the internal structure of the spray gun, causing the pressure of the spray gun to decrease and the spray to become irregular, resulting in unsatisfactory spray effects!
Solution: Choose an appropriate spray gun based on its water pressure tolerance.
Reason 2: Whether it is corroded
The automatic fine atomization nozzle sometimes sprays not necessarily water, but other chemical liquids, which may cause corrosion over time.
Solution: Clean the automatic atomizing nozzle immediately after each spray. Also pay attention to the choice of cleaning agent. If you choose the wrong cleaning agent (choose a corrosive one), it will cause secondary corrosion of the nozzle.
Reason three: Whether blockage occurs
The water used for fire extinguishing is not domestic water and may contain impurities. After the automatic fine atomization nozzle is used for a long time, chemical substances and impurities will be deposited inside or on the edge of the spray gun, causing the spray gun to become clogged. Once the nozzle is clogged, the pressure inside it will increase, damaging the inside of the nozzle.
Solution: Clean the inside of the spray gun regularly to keep the inside of the spray gun clean.
Reason 4. Accidental damage
There are many reasons for accidental damage, which may be irregular use, improper maintenance, or improper storage, etc.
Solution: Use it correctly according to regulations, maintain it regularly, and keep it properly
Basically, there are only so many reasons. If the nozzle effect is not good, you can find and eliminate it according to the above reasons. I hope it can help everyone.
