More
Recommended products
Anhui Lanzhong Mechanical and Electrical Equipment Co., Ltd.
WhatsApp: +86-138-6598-5643
Contact person: Alex Wang
Email: alexwang@watermist.com.cn
Address: Room 101-Room 401, Building B8, Gongtou Lingang New Industrial Park, No.21 Science Avenue, Shou County, Huainan city, Anhui Province, China
Industry trends
A brief discussion on the characteristics of micro submersible pumps
A brief discussion on the characteristics of micro submersible pumps
1. Can pump liquids containing particles and oil.
Since the impeller clearance inside the impeller pump is large, even smaller solid particles are allowed to pass through, so liquids containing smaller particles can be easily discharged.
2. Stable output flow
The characteristics of central symmetry, unlike diaphragm pumps or piston pumps driven by eccentric wheels, there is almost no "pulsation" phenomenon.
3. No need to add water
It is fully or partially submerged in water, so there is no need to add water manually every time, which overcomes the disadvantage of not having self-priming ability; it also solves the shortcomings of piston-type water pumps and diaphragm-type water pumps that cannot pump particles.
4. Ultra-large flow and ultra-small volume
The use of ball bearings and high-speed permanent magnet motors makes its speed and stability far exceed those of ordinary civilian submersible pump motors, and can achieve several times the flow rate of ordinary submersible pumps.
5. Low noise
The noise is lower than that of piston water pumps or diaphragm water pumps.
6. Resistant to seawater corrosion
The ABS shell is ultrasonically formed, and the pump shaft is made of stainless steel, which is wear-resistant and non-corrosive and can be used in both fresh water and sea water.
Of course there are also shortcomings
1. The main disadvantage is that the output pressure is not large (the head is not high). It can only be used in situations with large flow and low head.
2. Do not run without water, otherwise the seal will easily be damaged due to high temperature, and water will enter the motor and cause failure.
From the working principle and internal structure, we can know that the micro submersible pump is subordinate to the impeller pump. So what are the characteristics of micro submersible pumps? The following is explained by24V DC pump manufacturerLet’s take you through it.
1. Can pump liquids containing particles and oil.
Since the impeller clearance inside the impeller pump is large, even smaller solid particles are allowed to pass through, so liquids containing smaller particles can be easily discharged.
2. Stable output flow
The characteristics of central symmetry, unlike diaphragm pumps or piston pumps driven by eccentric wheels, there is almost no "pulsation" phenomenon.
3. No need to add water
It is fully or partially submerged in water, so there is no need to add water manually every time, which overcomes the disadvantage of not having self-priming ability; it also solves the shortcomings of piston-type water pumps and diaphragm-type water pumps that cannot pump particles.
4. Ultra-large flow and ultra-small volume
The use of ball bearings and high-speed permanent magnet motors makes its speed and stability far exceed those of ordinary civilian submersible pump motors, and can achieve several times the flow rate of ordinary submersible pumps.
5. Low noise
The noise is lower than that of piston water pumps or diaphragm water pumps.
6. Resistant to seawater corrosion
The ABS shell is ultrasonically formed, and the pump shaft is made of stainless steel, which is wear-resistant and non-corrosive and can be used in both fresh water and sea water.
Of course there are also shortcomings
1. The main disadvantage is that the output pressure is not large (the head is not high). It can only be used in situations with large flow and low head.
2. Do not run without water, otherwise the seal will easily be damaged due to high temperature, and water will enter the motor and cause failure.
