The nozzles used in electronic factories are mainly divided into two categories. One is fire-fighting nozzles. After all, electronic factories have a lot of equipment and people, so fire-fighting measures must be taken. The other is industrial nozzles, which are used in various aspects of production and have different functions. The following are the application scenarios of nozzles in electronics factories and the types of commonly used nozzles in power plants.

1. Application scenarios of nozzles in electronics factories

1. Humidification and cooling of large spaces in large electronic factories

2. Cleaning nozzle for electronic board

3. Rosin nozzle after circuit board molding

4. The circuit board uses Saigon nozzle

5. Fire-proof and fire-extinguishing sprinklers for distribution boxes and archives rooms

2. Types of nozzles in electronics factories

The role of fire sprinklers in electronics factories is to prevent and extinguish fires, while industrial sprinkler nozzles are mostly used in cleaning and production of electronic equipment. For example, in circuit board manufacturing, developing, rinsing, etching, film removal, burr cleaning, moisture-proof glue spraying, etc. require cleaning nozzles. The following are the types of nozzles commonly used in electronics factories:

1.Fine water mist nozzle

2. Perfluorohexanone nozzle

3. Water curtain nozzle

4. Fine atomization nozzle

5. Fan-shaped nozzle

6. Air atomization nozzle, etc.

3. Use of nozzles in electronics factories

The main functions of sprinklers in electronics factories include fire protection, cooling, cleaning and humidification. According to relevant regulations, all factory buildings need to install fire sprinklers. As for cleaning, cooling and humidification, appropriate sprinklers should be selected according to the needs of the electronics factory and applied to all aspects of production. The specific uses are reflected in the following points:

1. Circuit board development and etching process

2. For humidification and cooling of large spaces in large electronic factories, use atomized nozzles.

3. Circuit board solder mask cleaning

4. Electronic board cleaning nozzle, fan-shaped, wide-angle, quick-release nozzle

5. Application of rosin nozzle after the circuit board is formed. Spray rosin to protect the circuit board.

6. The circuit board uses a one-piece nozzle

7. Other low pressure sprays