Water-driven cleaning nozzles are also called hydrodynamic self-rotating nozzles, which rely on the water energy of the water pump of the device to drive the nozzles to rotate at high speed without the need for external power. The water-driven cleaning nozzle includes a water inlet assembly and a water outlet mechanism. The water outlet mechanism is installed in the water inlet assembly and can rotate in the water inlet assembly. The water inlet assembly includes a main body, a water inlet barrel, a spring, and an elastic mechanism provided at the lower end of the water inlet barrel.

Water driven cleaning nozzle product features:

1. The axial and radial directions rotate simultaneously according to the set trajectory, truly realizing 360° cleaning inside the tank;

2. The cleaning fluid drives the turbine to rotate, and the turbine drives the internal gear reduction mechanism. The gear mechanism finally drives the can washer to rotate, achieving axial and radial rotation;

3. During the cleaning process, it can clean itself. During the cleaning process, it is self-lubricated by the cleaning fluid;

4. Using advanced dynamic sealing technology, the leakage point is sealed with imported rotating seals to reduce leakage, reduce pressure loss, and save cleaning fluid.

Water driven cleaning nozzle material:

Water-driven cleaning nozzle shell material: stainless steel 304 and stainless steel 316 are used as raw materials

Nozzle mouth material: Generally, gemstone nozzles and alloy nozzles are used. Gemstone nozzles are more wear-resistant than alloy nozzles.

Structural design of water-driven cleaning nozzle:

The number of nozzles of the water-driven cleaning nozzle can be designed. Common ones include two holes, three holes, four holes and six holes. The specific design details are as follows:

1. Two-hole water-driven cleaning nozzle

It can be used for equipment with a power of less than 40kw and a water pressure of 500bar. The nozzle speed can be adjusted (500 rpm ~ 4000 rpm). There is also a type for equipment with a power of less than 40kw and a water pressure of 1000bar. The nozzle speed can be adjusted (500 rpm ~ 4000 rpm).

2. Three-hole water-driven cleaning nozzle

The three-hole water-driven cleaning nozzle is actually made of six holes with three holes blocked. It can be used for equipment with a power of less than 125kw and a water pressure of 3000bar. The nozzle speed can be adjusted (500 rpm ~ 4000 rpm).

3. Four-hole water-driven cleaning nozzle

It can be used for equipment with a power of less than 40kw and a water pressure of 500bar, or for equipment with a power of less than 40kw and a water pressure of 1000bar. The nozzle speed can be adjusted (500 rpm ~ 4000 rpm).

4. Six-hole water-driven cleaning nozzle

It is used for equipment with a power of less than 125kw and a water pressure of 3000bar. The nozzle speed can be adjusted (500 to 4000 rpm) and the temperature resistance is 70°.

Water-driven cleaning nozzle application scenarios:

Water-driven cleaning nozzles are widely used in biology, medicine, shipbuilding, chemical industry, beer and beverage and other industries, and can perform high-impact cleaning operations. The following are common uses for water-driven cleaning nozzles:

① Surface cleaning.

②Cleaning of underground pipes, conveyor pipes and sewers.

③Cleaning of the inner surfaces of water tanks and containers.

④Spray drying tower cleaning and chemical tank cleaning.