The pipe cleaning nozzle product is made of stainless steel as a whole, which is corrosion-resistant and is generally used to clear pipelines. The pipe cleaning nozzle is directly connected to the fast street of the pipe. There is a hole at the top that sprays forward, and the 3/6 holes next to it spray diagonally rearward, which will generate a forward thrust and automatically push the pipe into the pipe, similar to a mouse drilling a hole, so it is often called a water mouse nozzle.

Pipe cleaning nozzle product features:

1.Stainless steel material

2. Rear 3/rear 6 standard configuration

3. It contains a copper rotating body and is not suitable for working conditions above 150bar. There are five holes in the front of the nozzle and only 3/6 holes in the back.

4. The rear hole injection generates recoil, pushing the nozzle forward.

Pipe cleaning nozzle specifications:

Commonly used pipe cleaning nozzle interface sizes are 1/4; 3/8; 1/2; 3/4; 1, and customers can also customize them according to their own needs. The following is a general model selection table:

Pipe cleaning nozzle performance data:

● Impact power: The impact power of the nozzle exceeds that of the cylindrical nozzle

● Working surface: Select the nozzle specifications according to the diameter of the pipe

● Operation efficiency: It combines the operation advantages of cylindrical nozzles and fan-shaped nozzles, and is a highly efficient cleaning accessory.

●Jet design: small resistance, higher impact than similar products

Pipe cleaning nozzle structural design:

There are two common design forms of pipe cleaning nozzles, one is a short round head design, and the other is a bullet head design.

Short round head design: There are 1 front and 6 back (30 degrees), a total of 7 nozzle holes, suitable for generally curved sewers, the short round nozzle can turn in a small radius

The bullet head design has a total of 4 nozzle holes, 1 in front and 3 in back (30 degrees). It is suitable for generally curved sewers. It has few water outlets and high water outlet pressure from a single hole. It can carry out intensive cleaning of the inner wall of the pipe.

Pipe cleaning nozzle application scenarios:

The pipe cleaning nozzle is resistant to high pressure and wear, and can be sprayed from a variety of different angles for powerful cleaning and effective cleaning. It is generally used for cleaning and dredging various pipes such as hotel pipes, sewage pipes, municipal pipes, and community pipes. It is used for pipe cleaning of 50mm-300mm. In addition, pipe cleaning nozzles can also be used in the following scenarios:

1. Clear the pipeline

2. Cleaning of public buildings and urban sculptures

3. Oilfield pipeline cleaning, wellhead oil removal and cleaning

4. Cleaning of heat exchangers, reactors, pressure vessels, and rotors in chemical plants

5. Cleaning of pool walls in sewage treatment plants and external cleaning of various facilities

6. Cleaning of exhaust ducts in restaurants and hotels

7. Cleaning of building exterior walls

8. Paint removal, rust removal and renovation of noticeboards and billboards

9. Cleaning of outer walls of various bridges

10. Internal and external cleaning of large buildings, such as TV towers and chimneys

11. Internal cleaning and dredging of municipal water supply and drainage pipelines, oil and gas pipelines, etc.